The variety of spindle type, the new high-precision spindle is characterized by environmental protection, before the production will produce a lot of oil and gas, and now have a lot of improvement, there is more energy than the previous spindle.
 
High precision spindle with imported ceramic ball bearings to increase rigidity, the maximum speed, working voltage, torque, power and similar oil mist electric spindle consistent, stable and reliable quality, life and oil mist can be comparable to the lubrication of the spindle.
 
Precautions for use of the spindle
1, the spindle and the inverter should be used in conjunction with the inverter specifications and parameters should be set and the spindle rated parameters to match. If the settings are not correct, will burn the spindle.
2, water-cooled spindle before use must ensure that the cooling cycle system is working properly, is strictly prohibited in the absence of cooling conditions, the use of cooling pipes and faucets must be reliable, no leakage.
3, coolant must be clean, no greasy, temperature control in the 5-30 degrees Celsius. If the ambient temperature is higher than 40 degrees Celsius cooling medium must be forced to refrigeration.
4, the spindle in the preservation and transportation process, the bearing within the high-speed grease status will change, the customer should be used before the first low-speed running. Running from the minimum speed of the spindle began to run, if not run directly high-speed start, will produce abnormal sound, noise, heat and other phenomena, affecting the service life of spindle bearings.
 
And the spindle must be preheated every day, iso-spindle to reach the processing speed after the processing, but also to prohibit percussion spindle, in the transport and custody should also pay attention to prevent the special attention is the end of the shaft.